Panasonic KX-TGP500, KX-TGP550 Intercom features between the handset and base unit (KX-TGP550 only)

Intercom Features
46
Note:
LIf the other handset user does not answer the
call within 1 minute, the call rings at your
handset again.
Answering a transferred call
Press {C} to answer the page.
Note:
LAfter the paging party disconnects, you can talk
to the outside caller.
Intercom features between
the handset and base unit
(KX-TGP550 only)
Intercom
Intercom calls can be made between the handset
and base unit.
Note:
LIf you receive an outside call while talking on the
intercom, you hear interrupt tones (page 28, 34).
– To answer the call with the handset, press
{OFF}, then press {C}.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
{SP-PHONE} 2 times.
LWhen paging the handset, the paged handset
beeps for 1 minute.
Making an intercom call
1{MENU} (center of joystick)
2{V}/{^}: “Intercom” i {SELECT}
3{V}/{^}: Select the desired unit. i {CALL}
LTo stop paging, press {OFF}.
4When you finish talking, press {OFF}.
1Press {j} – {k} or {ALL}.
LLift the corded handset if needed.
LTo stop paging, press the same button.
2When you finish talking, press {SP-PHONE}
or place the corded handset on the cradle.
Answering an intercom call
1Press {C} to answer the page.
2When you finish talking, press {OFF}.
1Lift the corded handset or press {SP-PHONE}
to answer the page.
2When you finish talking, place the corded
handset on the cradle or press {SP-PHONE}.
Answering an intercom call using auto
intercom
Before using the auto intercom, turn auto intercom
on (page 45).
1When you are paged by the base unit, speak
into the microphone.
LTo switch to the receiver, press {C}.
2To end the intercom, press {OFF}.
Monitoring audio in a room using auto
intercom
You can listen to the sound in a room where the
handset is located using the auto intercom.
Important:
LBefore using this feature, set auto intercom on
the destination handset to “On (Ringer
Off)” to allow access by the base unit.
1Call the destination handset (page 46).
LYou can listen to the audio.
2To mute your sound output, press {MUTE} if
necessary.
3To stop monitoring, press {SP-PHONE} or
place the corded handset on the cradle.
Y Handset
: Base unit
Y Handset
: Base unit
Y Handset
: Base unit