Assembly (continued)
11
Step Four: Attach wheels to cart ba se

1. Slide axle into holes on bottom of cart.

2. Slide tir es and wh eel retain ers ont o the axle.

3. Tighten wheel retainers with supplied hex wrench.

Step Five: Attach pressure gauge

1. Remove and discard the plug in the gauge port.

2. Thread in gauge. Hand tighten, then turn 2 full turns with a wrench.

Step Six: Attach gun hos e to s pray gun an d pump

1. Install hose clamps on hose. Follow hose clamp installation instructions below.

2. Using 2 hose clamps, attach one end of the gun hose to the pump hose barb.

3. Using 2 hose clamps, attach the other end of the gun hose to the spray gun.

02171
Plug
Pressure gauge
Gun hos
e
Hose clam
p
s
Spray gun
Hose clam
p
s
Hose Clam
p
Instruct i o n s:
i) Slide hose clamp over
the end of the hose.
ii) Push the hose onto the
hose barb.
iii) Slide the hose clamp
over the hose barb.
iv) Ti g h t en t h e h o s e cl am p
Wood
p
lan
k
or spacer
(Not included)
Cart bas
e
Axl
e
Tir
e
Wheel
retaine
r