![](/images/new-backgrounds/1176451/17645151x1.webp)
Operation - Using the Sprayer (continued)
Step Three: Operate the sprayer.
WARNING
ALWAYS wear personal protective equipment as directed on the chemical label when spraying.
Long pants and sleeves,
1. Review safety | Review the “Operation – Important Safety Information” related to Chemical |
information | Application Safety and ATV Vehicle Handling Safety provided in this manual. |
2. Wear personal | Wear personal protective equipment as directed on the chemical label. |
protective | WARNING: Wear additional personal protective equipment if you will be |
equipment | spraying overhead or fogging. You will be exposed to much more pesticide |
| fallout in these applications. Wear chemical resistant head and neck protection, |
| full face mask or half face mask with sealed goggles, and consider using a |
| dust/mist respirator. |
3. Open priming | Turn priming valve lever so that it is |
valve |
|
| Priming |
| valve lever |
Priming hose
0 1 54 2
4. Turn on power | Turn on the power to the sprayer. |
| 1. Verify the battery power cord is connected to the remote switch power cord |
| and that the remote switch power cord is connected to the pump power cord. |
| 2. Turn the remote switch to the “ON” position. |
| Note: The pump will start automatically when power is turned on. Running |
| the pump dry will void all warranties. |
5. Ensure flow | Once chemical is flowing through the priming hose, close the priming valve. |
through priming |
|
hose |
|
| Priming valve |
0 15 4 2
26