Thermal Protector
➢If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum.
➢During this time the headlight remains on.
➢To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace filters.
➢Empty dust bin if necessary.
➢Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal protector has reset. Thermal protector will not reset if vacuum is not turned off even if vacuum cools down.
Motor Protector
Motor |
Protector |
Protecteur |
du moteur |
Protector |
del motor |
➢Automatically opens to provide cooling air to the motor when a clog occurs or when dust bin needs changing.
➢Motor protector may open when using tools.
➢Check operation by placing hand over end of hose.
➢If motor protector opens, the vacuum will make a slightly different sound.
Note: Do not block motor protector.
- 18 -
