Replacing Belt
Motor Shaft 
Arbre d’entraînement du moteur
Eje del motor
Belt |
Courroie |
Correa |
End Cap |
Bouchon |
Tapa de |
extremo |
Groove |
Ouverture |
Ranura |
➢Remove lower plate and agitator.
➢Remove worn or broken belt.
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and belt pulley; see illustration for correct belt routing.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate.
| Replacing Agitator |
| ➢ When the bristles on the agitator are |
| worn so that they do not touch a card |
| held across the lower plate, the agitator |
| should be replaced. |
| ➢ Remove lower plate and agitator. |
| ➢ Position belt over belt pulley on the new |
| agitator. |
Card | ➢ Reinstall agitator and lower plate. |
Carte | |
Tarjeta |
|
Agitator Assembly
Agitator Unit
End Cap
End Cap 
- 38 -
