IMPORTANT SAFETY INSTRUCTIONS

When using your vacuum cleaner, basic precautions should always be followed, including the following:

Read all instructions in this manual before assembling or using your vacuum cleaner.

WARNING To reduce the risk of fire, electrical shock, and injury:

1.Use your vacuum cleaner only as described in this manual. Use only with Panasonic recommended attachments.

2.Disconnect electrical supply before servicing or cleaning out the brush area.

3.Do not leave vacuum cleaner when plugged in. Unplug from outlet when not in use and before servicing.

4.To reduce the risk of electrical shock - Do not use outdoors or on wet surfaces.

5.Do not allow to be used as a toy. Close attention is necessary when used by or near children.

6.Do not use with a damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped in water, return it to a Panasonic Service Center.

7.Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.

8.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9.Do not handle plug or vacuum cleaner with wet hands.

10.Do not put any objects into openings.

11.Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

12.Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

13.Turn off all controls before unplugging.

14.Use extra care when cleaning on stairs. Do not put on chairs, tables, etc. Keep on floor.

15.Do not use vacuum cleaner to pick up flammable or combustible liquids (gasoline, cleaning fluid, perfumes, etc.), or use in areas where they may be present. The fumes from these substances can create a fire hazard or explosion.

16.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

17.Do not use vacuum cleaner without dust bin and/or filters in place.

18.Unplug before connecting Air Turbine (if applicable).

19.Hold plug when rewinding onto cord reel. DO NOT allow plug to whip when rewinding.

20.You are responsible for making sure that your vacuum cleaner is not used by anyone who is unable to operate it properly.

SAVE THESE INSTRUCTIONS

THIS VACUUM CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY

NOTE: Before you plug in your Panasonic vacuum cleaner, make sure that the voltage indicated on the rating plate located at the back of the vacuum cleaner is the same as your local electrical supply.

- 7 -

Page 6 Page 8
Page 7
Image 7
Panasonic MCUL815 operating instructions Important Safety Instructions
Page 6 Page 8

MCUL815 specifications

The Panasonic MCUL815 is a sophisticated microcontroller unit (MCU) designed to cater to a wide array of applications across various industries, including consumer electronics, automotive, and industrial automation. This MCU is part of Panasonic's esteemed family of microcontrollers that prioritize precision, efficiency, and reliability.

One of the standout features of the MCUL815 is its advanced 32-bit architecture. This design provides an ideal balance between processing power and energy efficiency, making it suitable for real-time applications that require quick response times. The microcontroller boasts a robust processing capability with a clock speed that can reach up to 48 MHz, ensuring that demanding tasks are handled seamlessly.

The MCUL815 also comes equipped with significant memory options, including flash memory for program storage and SRAM for data processing. Depending on the specific model, the MCU can offer varying memory sizes, enabling designers to select an option that fits their project needs perfectly. This versatility allows for more complex applications and enhanced program functionality.

One of the most notable aspects of the MCUL815 is its rich set of integrated peripheral functions. These include a variety of communication interfaces such as I2C, SPI, and UART, which facilitate easy connectivity with other devices. Advanced analog capabilities, like an Analog-to-Digital Converter (ADC), enable the MCU to process real-world signals accurately, making it ideal for sensor-based applications.

Additionally, the device incorporates various built-in safety features and low-power modes, allowing it to operate efficiently in battery-powered applications. The low-power consumption characteristics are particularly valuable in designing energy-efficient solutions that prolong battery life without compromising performance.

Furthermore, the Panasonic MCUL815 supports modern development tools and environments, streamlining the design process. It is compatible with various IDEs and provides extensive documentation and support, empowering engineers to develop tailored solutions with ease.

In summary, the Panasonic MCUL815 stands out due to its powerful 32-bit processing capability, extensive memory options, versatile integrated peripherals, and efficiency-oriented design. These characteristics make it a reliable choice for a broad spectrum of applications, ensuring that developers can innovate confidently while meeting the rigorous demands of today's technology landscape. Whether it is for smart home devices, automotive systems, or industrial controls, the MCUL815 provides the necessary features and technologies to drive modern applications forward effectively.
Top Page Image Contents