Panasonic NV-GS230EB operating instructions To play back the sound recorded with Audio dubbing

Edit mode

Audio dubbing

You can add music or narration to the recorded cassette.

$Set to Tape Playback Mode.

1Insert an external microphone securely into the [MIC] terminal as far as it will go.

MIC

2Find a scene that you want to add sound to, and press the [4] button on the remote control.

!

3Press the [AUDIO DUB] button on the remote control to make audio dubbing ready.

A.DUB !

4Press the [4] button on the remote control to start audio dubbing.

A.DUB "

$Talk into the microphone.

5Press the [4] button on the remote control to stop audio dubbing.

%Before recording with audio dubbing $Set to Tape Recording Mode.

$When you want to preserve the original sound taken during recording, set [SETUP] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.)

$Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.

%To play back the sound recorded with

audio dubbing

You can switch between the sound recorded with audio dubbing and the original sound.

Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by

audio dubbing.

[MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing.

%To dub audio while listening to a

pre-recorded sound

$When pausing the audio dubbing, set the [12bit AUDIO] on the [SETUP] Sub-Menu to [ST2] and you can check the pre-recorded sound.

$If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

41

VQT0T87