Edit mode
42
VQT0T87
Printing pictures by directly connecting to the printer (PictBridge)To print pictures by directly connecting the movie
camera to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
$Insert a card and set to Picture Playback
Mode.
1Connect the movie camera and the printer
with the supplied USB cable.
! USB cable
$The [PictBridge] indication appears on the
screen of the movie camera.
(When the printer is being recognized, the
[PictBridge] indication blinks.)
$When no card is inserted in the movie camera,
the [PictBridge] indication does not appear.
(You cannot print any pictures.)
$When the movie camera and the printer are not
connected properly, the [PictBridge] indication
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.
$We recommend using the AC adaptor as the
power supply.
$When images are displayed in multi-screen,
they cannot be printed.
2Select [SINGLE PRINT] or [DPOF PRINT].
$If there is no file with a DPOF setting, you
cannot select [DPOF PRINT].
$When you select [DPOF PRINT] for printing,
set the number of prints in DPOF setting.
$When [DPOF PRINT] is selected, print after
you determine the paper size.
3Move the joystick left and right to select a
desired picture, and then press it.
4Select the desired number of prints.
$You can set up to 9 prints.
5Select the setting for date printing.
$If the printer is not capable of date printing,
this setting is unavailable.
6Select the paper size.
[STANDARD]: Size specific to the printer
[4;5 INCH]
[5;7 INCH]
[4;6 INCH]
[A4]
$You cannot set paper sizes not supported on
the printer.
7Set [PRINT] >> [YES] to start printing.
%When you stop printing halfway
Move the joystick down.
$Avoid the following operations during printing.
These operations disable proper printing.
$Disconnecting the USB cable
$Removing the card
$Switching the mode dial
$Turning off the power
$Check the settings for the paper size, quality of
print, etc. on the printer.
$You cannot print pictures that cannot be played
on the movie camera.
$When the movie camera and the printer are
connected in the Tape Recording/Playback
Mode, the [ WEB] or the [ WEB] Indication
may appear on the LCD monitor. However,
pictures cannot be printed.
1
PictBridge