Playback mode
Playback mode
Playing back tape
$Set to Tape Playback Mode.
PC
1Operate with joystick.
./4: Playback/Pause
3: Rewind/Review playback (Reverts to playback with the ./4*icon.)
6: Fast forward/Cue playback (Reverts to playback with the ./4 icon.)
5: Stop
$During cue/review playback,
screen may become black for a moment or images may be disturbed.
%To adjust volume
Adjust the speaker or headphone volume for playback.
1Move the [' 
/VOL(] lever to adjust the volume.
/VOL
W 
T
Towards [(]: increases the volume
Towards [']: decreases the volume (Nearer the bar to [(], larger the volume.)
$On the remote control, press the [T] button to increase the volume or the [W] button to decrease it.
$When the adjustment is completed, the volume indication will disappear.
$If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].
34
%Repeat playback
When the tape end is reached, the tape will be rewound and played back again.
1Set [ADVANCE] >> [REPEAT PLAY] >> [ON].
$The [ 
] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or set [OFF/ON] switch to [OFF].)
$When you set [USB FUNCTION] >> [WEBCAM] and then connect the USB connection cable, the repeat playback mode is cancelled.
%Settings on the audio
$If you cannot listen to the desired audio when
playing back a tape, check the settings in [SETUP] >> [12bit AUDIO].
$When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].
Slow-motion playback/ frame-by-frame playback
$Set to Tape Playback Mode.
Slow-motion playback
If the image is recorded in the SP mode, then it will be played back at a speed approx.1/5 the normal speed.
If the image is recorded in the LP mode, then it will be played back at a speed approx.1/3 the normal speed.
1Press the [0] button or the [1] button on the remote control.
$If the
VQT0T87
