Record mode
Manual focus adjustment
If auto focusing is difficult due to the conditions, then manual focusing is available.
$Set to Tape/Card Recording Mode.
1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
AUTO
MANUAL
FOCUS
2Set the [AUTO/MANUAL/FOCUS] switch to [FOCUS].
AUTO
MANUAL
FOCUS
MNL
MF
$The MNL and the manual focus indication [MF] will be displayed.
3Move the joystick left or right in order to adjust the focus.
MNL
MF
$When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it.
%To restore to the automatic
adjustment
Set the [AUTO/MANUAL/FOCUS] switch to [AUTO] or [FOCUS].
Manual shutter speed/aperture adjustment
Shutter Speed
Adjust it when recording
Aperture
Adjust it when the screen is too bright or too dark. $Set to Tape/Card Recording Mode.
1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
AUTO
MANUAL
FOCUS
2Move the joystick down until the shutter speed indication or aperture value indication appears.
|
|
| MNL |
|
|
| 1/50 |
|
|
| OPEN |
|
|
| OdB |
1) | MNL | 2) | MNL |
1/1000 |
|
| 1/50 |
|
|
| F2.0 |
|
|
| 0dB |
1)Shutter speed
2)(Aperture) Iris/gain value
3Move the joystick left or right in order to adjust the shutter speed or aperture.
%To restore to automatic adjustment
Set the [AUTO/MANUAL/FOCUS] switch to [AUTO].
Manual shutter speed adjustment
$Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.
$If you increase the shutter speed manually, the sensitivity lowers and accordingly the gain value increases automatically, which may increase the noises on the screen.
$You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction.
$During normal playback, image movement may not look smooth.
$When recording in the extremely bright place, the colour of the screen may change or flickers. If so adjust the shutter speed manually to 1/50 or 1/100.
32
VQT0T87
