About Your Projector

 

 

 

 

 

 

 

 

 

 

Back and bottom view

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Security lock

 

 

 

 

 

 

 

Attach the commercial shackle

 

 

 

 

 

 

 

lock, manufactured by

 

 

 

 

 

Air intake port

 

Kensington, to protect your

 

Top cover

 

 

 

 

projector. Compatible with the

 

Hold at the back corner of the Top

 

 

 

 

 

 

 

Kensington MicroSaver Security

 

cover and slightly push up to

 

 

 

 

System.

 

open. (page 42)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air intake port

AC IN

Connect the Power cord to supply electronic power to the projector. (page 19)

Lens cover attachment hole

Front leg adjusters

Screw up/down to adjust the projection angle. (page 21)

Preparation

Connecting

terminals (page 18)

SERIAL

Connect a compatible cable for controlling the projector remotely via your PC.

PC IN

Connect an RGB signal cable from your PC.

COMPONENT 1 IN Connect a YPBPR signal cable.

S-VIDEO IN Connect a S-VIDEO signal cable.

VIDEO IN Connect an RCA composite video cable.

 

 

 

 

HDMI IN

 

COMPONENT 2 IN

Connect HDMI signal cables.

 

Connect a YPBPR signal cable.

 

 

 

 

NOTE:

Do not cover the ventilation openings or place anything within 50 cm (20") of the vents as this may cause damage or injury.

This projector should only be used with the attached Power cord to ensure optimum performance and avoid damage to the projector.

Do not open the Top cover other than replacing the lamp unit.

ENGLISH - 13

Page 13
Image 13
Panasonic PT-AE1000U manual Back and bottom view, Serial, Hdmi Component 2