Remote control operation
Setting your own color profile
Basic Operation
You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu.
PROFILE | NORMAL |
|
CURSOR
LOG
PROFILE SAVE
Create a new profile
Adjusting the selected color
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
1.Select the CURSOR menu and press
ENTER.
The projected image is captured, and the target cursor is displayed.
When the LOG is fully stored, the target cursor will not be displayed. See "Managing stored logs" on page 26.
Target cursor
2.Move the cursor with F G I H to the required place to select a color and press
ENTER.
The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen.
CURSOR
| RETURN | COLOR | |
SELECT | ENTER | TINT | |
BRIGHTNESS | |||
DEFAULT | |||
| |||
3.Select a menu item and the I H to adjust each item level.
The result box is displayed on the right of the cursor and shows the adjusted color.
CURSOR |
|
| |
| RETURN | COLOR | |
|
| ||
SELECT | ENTER | TINT | |
BRIGHTNESS | |||
| |||
DEFAULT | |||
| |||
|
| Adjusted color | |
COLOR | Adjust the vividness of the color. | |
Setting range: | ||
| ||
TINT | Adjust the color tone. | |
Setting range: | ||
| ||
BRIGHTNESS | Adjust the brightness of the color. | |
Setting range: |
4. Press ENTER to store the adjusted result.
“PROCESSING” is displayed for a few seconds and the result is stored in LOG.
You can store up to 8 logs under LOG for each PICTURE MODE setting.
5.Press MENU or RETURN to return to the previous menu.
Repeat the steps above to store more adjustment.
Sampled color
26 - ENGLISH
