Remote control operation
Adjusting the focus and zoom
You can adjust the focus and zoom of the | display the LENS control menu. See "LENS |
projected image. Press the LENS button to | CONTROL Menu" on page 37. |
Switching the picture mode
You can switch the preset picture mode settings by pressing the PIC. MODE button. Press the button until the required setting is selected. See "PICTURE MODE" on page 31.
Adjusting the image
You can display one of the PICTURE or ADVANCED menu items by pressing the PICTURE ADJUSTMENT button. Press the button to switch between PICTURE and ADVANCED menu. Press F G to select the required menu item and I H to adjust.
PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, COLOR TEMPERATURE and DYNAMIC IRIS
NORMAL | CINEMA3 |
|
DYNAMIC 
CINEMA2
COLOR1
COLOR2 | CINEMA1 |
ADVANCED menu items
GAMMA, CONTRAST, BRIGHTNESS, NR, MPEG NR, CINEMA REALITY and
NOTE:
For each menu items description, see “PICTURE Menu” on page 31.
The screen will be cleared after 7 seconds without any operation.
Basic Operation
Switching off the projector automatically
You can switch off the POWER automatically by setting the SLEEP feature. Press the SLEEP button several times to cycle through the duration of time. See "SLEEP" on page 39.
OFF
60MIN.
90MIN.
120MIN.
240MIN.
210MIN.
180MIN.
150MIN.
Loading a saved setting
You can access saved settings instantly. See "MEMORY LOAD" on page 33.
1.Select the required setting from MEMORY1 - 5.
Undefined setting will not be displayed.
2. Press ENTER to activate the selected setting.
NOTE:
If you have not saved any settings, MEMORY1 - 5 will not be displayed.
ENGLISH - 25
