|
|
|
| Technical Information | |
|
|
|
|
| |
Control commands |
|
|
| ||
|
|
|
|
| |
Command | Control contents |
|
| Remarks | |
|
| In standby mode, all commands other than the PON command are | |||
PON | Power ON | ignored. |
|
| |
|
| The PON command is ignored during lamp ON control. | |||
|
| If a PON command is received while the cooling fan is operating after | |||
POF | Power OFF | the lamp has switched off, the lamp is not turned back on again straight | |||
|
| away in order to protect the lamp. | |||
|
| Parameter: (page 23) | SVD = | ||
IIS | INPUT | VID = VIDEO IN | HD1 = HDMI1 IN | ||
RG1 = PC IN |
| HD2 = HDMI2 IN | |||
|
|
| |||
|
| CP2 = COMPONENT1 IN | CP2 = COMPONENT2 IN | ||
OMN | MAIN | Displaying Main menu |
| ||
|
|
| |||
OEN | ENTER | Activating the selected items in menu mode. | |||
|
|
| |||
OBK | RETURN | Returning to the previous menu or escaping from the menu mode. | |||
|
|
|
| ||
OCU/OCD/ | Navigation buttons | OCU = F button | OCL = I button | ||
OCL/OCR | OCD = G button | OCR = H button | |||
| |||||
|
|
| |||
OLE | LENS CONTROL | Activating the LENS CONTROL menu. | |||
|
|
| |||
OST | DEFAULT | Resetting to the factory default setting. (page 22) | |||
|
|
| |||
|
| Freezing the projected screen. | |||
OFZ | FREEZE | Parameter: |
|
| |
|
| 0 = OFF |
| 1 = ON | |
|
| Setting the duration of time to turn off the power automatically. | |||
OOT | SLEEP | 0 = OFF | 1 = 60 min. | 2 = 90 min. 3 = 120 min. 4 = 150 min. | |
|
| 5 = 180 min. | 6 = 210 min. | 7 = 240 min. (page 25) | |
|
| Turning off the projection temporarily. | |||
OSH | SHUTTER | Send the command to switch between ON and OFF. | |||
|
| Do not send the command consecutively. | |||
OVM | PICTURE | Activating the PICTURE menu. Send the command to switch menu items. | |||
(page 28) |
|
| |||
|
|
|
| ||
|
| Activating the WAVEFORM. | (page 24) | ||
|
| Parameter: |
| ||
|
| 0 = OFF |
| 5 = SINGLE LINE SCAN (Y) | |
OWM | WAVEFORM | 1 = FULL SCAN (Y) | |||
|
| 2 = FULL SCAN (R) | 6 = SINGLE LINE SCAN (R) | ||
|
| 3 = FULL SCAN (G) | 7 = SINGLE LINE SCAN (G) | ||
|
| 4 = FULL SCAN (B) | 8 = SINGLE LINE SCAN (B) | ||
VS1 | ASPECT | Switch the aspect ratio. (page 23) | |||
|
|
|
| ||
|
| Parameter: (page 25) | NOR=NORMAL | ||
|
| NAT=COLOR1 | |||
VPM | PICTURE MODE | DYN=DYNAMIC | CN1=CINEMA1 | ||
|
| CN2=CINEMA2 | CN3=CINEMA3 | ||
|
| VID=COLOR2 |
|
| |
Appendix
ENGLISH - 47
