PICTURE Menu
Settings
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and the lens iris on/off.
•ON: Automatic adjustment
•OFF: No adjustment
WAVEFORM MONITOR
You can monitor whether or not the luminance level of the input signal is in the recommended range by displaying it in the waveform monitor. If the waveform is not in the range, adjust it for the best quality. See “Adjusting the waveform of the input signal” on page 24.
OFF |
|
FULL SCAN(Y) |
|
FULL SCAN(R) |
|
FULL SCAN(G) |
|
FULL SCAN(B) |
|
SINGLE LINE SCAN(Y) |
|
SINGLE LINE SCAN(R) |
|
SINGLE LINE SCAN(G) |
|
SINGLE LINE SCAN(B) |
|
MONITOR POSITION | UPPER LEFT |
1.Press F G to move to the required waveform style.
2.Press ENTER to select.
The WAVEFORM MONITOR will be displayed.
3.Adjust the WAVEFORM MONITOR.
See “Adjusting the waveform of the input signal” on page 24.
ADVANCED MENU
From the ADVANCED MENU, you can perform more detailed image adjustment manually.
GAMMA
You can adjust linear intensity at 3 levels. Press I H to increase/decrease 1 point.
Levels | Default setting |
|
|
GAMMA HIGH | 0 |
|
|
GAMMA MID | 0 |
|
|
GAMMA LOW | 0 |
|
|
Setting range:
CONTRAST
You can adjust the amount of contrast in RGB colors individually. Press I H to increase/decrease 1 point.
RGB | Default setting |
|
|
CONTRAST R | 0 |
|
|
CONTRAST G | 0 |
|
|
CONTRAST B | 0 |
|
|
Setting range:
BRIGHTNESS
You can adjust the brightness in RGB colors individually. Press I H to increase/decrease 1 point.
RGB | Default setting |
|
|
BRIGHTNESS R | 0 |
|
|
BRIGHTNESS G | 0 |
|
|
BRIGHTNESS B | 0 |
|
|
Setting range:
COLOR MANAGEMENT
You can manage your own defined color settings. See “Setting your own color profile” on page 26.
NR (Noise Reduction)
You can switch the automatic noise reduction system on/off. Press I H to select the required setting.
•ON: Automatic noise reduction
•OFF: No noise reduction
NOTE:
Applying noise reduction may affect image quality.
32 - ENGLISH
