Switching the projector on/off
Power cord
Ensure all the input devices are connected and turned off before connecting the Power cord.
Connecting
Make sure to use the Power cord which is provided with the projector.
1. Ensure the shape of the power cord plug and the
AC IN connector on the
side of the projector match, then push the plug all the way in.
2. Connect the Power cord to a wall outlet.
Disconnecting
Make sure the MAIN POWER is switched off.
1.Hold the plug and unplug the Power cord from the wall outlet.
2.Hold the plug and unplug the Power cord from the AC IN connector on the side of the projector.
NOTE:
Do not force the connector as this may damage the projector and/or the power cord.
Dirt or dust
Switch off the power to the projector when not in use.
POWER indicator
POWER indicator
Indicator status | Status | ||
|
|
| |
No illumination or flashing | The MAIN POWER is switched off. | ||
|
|
| |
RED | Lit | The MAIN POWER is switched on and the projector is in standby. | |
|
|
| |
GREEN | Flashing | The POWER is switched on and the projector is getting ready to project. | |
|
| ||
Lit | The projector is ready to project. | ||
| |||
|
|
| |
| Lit | The POWER is switched off and the projector is cooling the lamp. | |
ORANGE |
|
| |
Flashing | The POWER is switched on again when cooling the lamp and recovering | ||
| |||
| to projection mode. Recovery may take a while. | ||
|
| ||
|
|
| |
NOTE:
While the projector is cooling the lamp, do not switch the MAIN POWER off or unplug the Power cord. The electric consumption in standby mode is 0.08 W.
Basic Operation
ENGLISH - 19
