V Position

Shift the projected image position vertically.

1111Press ▲▼ to select [V Position].

2222Press ► to display the adjustment dialog box.

3333Press ◄► to adjust the level.

Note

zzDuring Computer input signal, [V Position] can be adjusted.

Digital Zoom

Adjust the magnification of the image. Magnification can be set from 1.0x to 2.0x in 0.1 increments.

1111Press ▲▼ to select [Digital Zoom].

2222Press ► to display the adjustment dialog box.

3333Press ◄► to adjust the level.

Note

zzWhen the [Digital Zoom] is in the enlarge status, exits the menu screen and the [Zoom] picture will display at the bottom left of the screen. This indicates the zoom function is in use.

zzUnder the enlarge status, press ▲▼◄► to move the enlarged image.

zzIf the input signal is changed under the enlarge status, the magnification of [Digital Zoom] will be reset.

V Keystone

This function is used to adjust keystone distortion of the projected image.

1111Press ▲▼ to select [V Keystone].

2222Press ► to display the adjustment dialog box.

3333Press ◄► to adjust the level.

zzUse the <KEYSTONE+/-> (▲▼) buttons on the remote control to adjust.

Operation

Screen image

Press the ▲► on the remote control or the ► on the control panel to adjust the upper of the keystone.

Position

Press the ▼◄ on the remote control or the on the control panel to adjust the bottom of the keystone.

Note

zzThe adjusted keystone distortion will store automatically even when the signal is interrupted or the AC power cord is plugged out or turned off the projector.

zzWhen the larger amount of keystone correction, the picture quality will degrade and it will get harder to focus with more correction. Set the projector so the correction will be as small as possible.

zzWhen keystone correction is performed, the screen size will also change.

zzPart of Closed caption may not be displayed when high compensation values are set in [V Keystone].

Ceiling Mount

This function is used to project the image from a ceiling-mounted projector.

1111Press ▲▼ to select [Ceiling Mount].

2222Press ► to display the choosing dialog box.

3333Press ◄► to select the desired item.

Front

When setting on a desk/floor and

 

 

projecting from forward.

 

 

 

 

 

Front

When mounting on the ceiling and

 

 

Ceiling

projecting forward.

 

 

 

Rear

When setting on a desk/floor and

 

Settings

projecting rear (Using translucent

 

Rear

When mounting on the ceiling and

 

 

screen).

 

 

Ceiling

projecting from rear (Using translucent

 

 

screen).

 

 

 

 

 

 

 

 

 

ENGLISH - 39