LAN

JJProjector Status and Control

Sets the projector status and adjusts Image and Audio controls.

(1) [Projector Status]

. Confirm Projector Status.

. Press [Refresh] button to refresh.

(1). Press [Power ON] and [Power OFF] button to operate power status.

. Set the time for the projector to shut down automatically when there is no signal input in [Power

(2)Saving].

. Confirm the [Alert status] of abnormal conditions.

(2) [Image Control]

(3). Adjust projector image.

. Use the [AUTO ADJ.] button to adjust image to the best position and size.

(3)[Audio Control]

. Adjust projector volume.

JJE-mail Setting

Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings.

Settings

(1)

(2)

(3)

Note

zzThe E-mail function of this projector does not compatible with the advanced SMTP server.

(1) [E-mail Alert]

. Click [Enable] when using the E-mail function.

.Login [TO], [CC], [From] of the E-mail address to enable the abnormal E-mail notification.

.{up to 40 characters in single byte (15+@+24)}

.You can enter [Subject] information such as the location of the projector that notifies the sender of the

E-mail. (up to 30 characters in single byte )

(2) [SMTP Setting]

. Login [Out going SMTP server] (up to 30 characters in single byte )

(3) [Alert Condition]

.Enter [IP Address], [Device ID], [Port] when Crestron RoomView is in use and press [Save]. (Æpage 62)

JJSecurity Setting

Sets a password for the administrator to manage the Web.

(1)

(1) [Administrator]

.When set the password, click [Enable] and enter both of [New Password] and [Confirm Password] {4 characters in single byte (0~9, A~Z, a~z)}, and then click [Submit].

52 - ENGLISH