Maintenance/replacement
4444Clean the air filters.
zzVacuum dirt and dust from the air filters.
5555Install the air filters.
zzTo install the air filters, reverse the previous steps until you hear a "click" sound.
6666Reset the [Filter Reminder].
zzTurn on the power and perform [Cleaning up Reminder] in the [Options] menu. (Æpage 44)
Attention
zz Turn off the power before you clean the air filters.
zzBe sure to attach the air filters properly. If you use the projector without attaching the air filters, the projector may be damaged due to the dirt or dust.
Note
zzIf the air filter has been damaged or dust / dirt can not be removed, please replace it with a new filter.
zzThe <TEMP> indicator lights up and the warning temperature message displays because of clogging within 500 hours, depending on the using environment. In that case, clean the air filter at short intervals.
zzIf the spacer (detachable) of the adjustable feet is overlapping at removing the air filter (rear), rotate the spacer with grabbing the knob of the spacer to keep a clearance from the air filter (rear).
Bottom View
Air filter (side) 
Adjust feet (Rear)
Space (detachable) | Air filter (rear) |
Maintenance
56 - ENGLISH