LAN

Connect to Network

The projector has a network fuction, and the following operations are available from the computer using the web browser control.

zzSetting and adjustment of the projector. zzDisplay of the projector status.

zzTransmission of an E-mail message when there is a problem with the projector.

This projector supports "Crestron RoomView" and the following application software from Crestron company. (Æpage 53)

RoomView Express

Attention

zzConnects LAN to indoor equipment.

zzThe positions of the <COMPUTER 1 IN> and <LAN> terminals are close to each other. Therefore, when connecting cables to both terminals, removing the cable connected to the <LAN> terminal may be difficult. When removing the cable connected to the <LAN> terminal, remove the cable connected to the <COMPUTER 1 IN> terminal beforehand.

Note

zzA LAN cable is required to use the wired LAN function.

ComputerProjector

LAN cable (straight)

LAN cable (straight)

Hub

zzA Web browser is required to use this function. Confirm that the Web browser can be used beforehand. Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7 Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)

zzCommunication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.

zzUse shielded LAN cable (STP cable) that is compatible with category 5 or above. zzUse a LAN cable with length of 100m or shorter.

JJName and function of network function parts

Settings

(1) LINK lamp (yellow)

(1) (2) (3)

Lights on when connected.

(2) LAN terminal (10BASE-T/100BASE-TX)

Used to connect the LAN cable here.

(3) ACT lamp (green)

Blinks when transmitting/receiving data.

ENGLISH - 49