Settings

Audio

Select [Audio] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu.

Mute

Temporarily turn off the sound.

1111Press ▲▼ to select [Mute].

2222Press ► to display the setting dialog box.

3333Press ◄► to switch [On]/[Off].

On Mute.

Off Output audio.

zzPress <MUTE> button on the remote control can also turn on/off the sound.

Volume

Adjust the volume.

1111Press ▲▼ to select [Volume].

2222Press ► to display the adjustment dialog box.

3333Press ◄► to adjust the volume.

Operation

Adjustment

Adjustment

range

 

 

Press ►.

Turn up the volume

Maximum value 32

Press ◄.

Turn down the

Minimum value 0

volume

 

 

zzYou can also press the <VOLUME +/-> buttons on the remote control or on the control panel.

In Standby Mode (Audio)

This function is used to switch the output sound On/ Off at standby mode.

1111 Press ▲▼ to select [In Standby Mode (Audio)].

2222 Press ► to display the adjustment dialog box.

3333 Press ◄► to switch [On]/[Off].

On

Output audio when in Standby

mode.

 

Off

Mute the sound when in Standby

mode.

 

Note

zzWhen setting the [In Standby Mode (Audio)] function to [On] and in Standby mode status, the sound of the selected input source can be output from the <AUDIO OUT (VARIABLE)>.

zzWhen setting the [In Standby Mode (Audio)] function to [On] and in Standby mode status, use remote control to switch input sources, sound volume can be adjusted with <VOLUME +/-> buttons on the remote control.

zzWhen the projector changes from projection status to standby status, the sound of Computer 1 input will be the default output sound in spite of the selected input during projection. Press the source buttons on the remote control to switch to different sound.

zzThe sound of HDMI does not output even if the [In Standby Mode (Audio)] is set to [On].

42 - ENGLISH