Panasonic D6KE, PT-DW6300K manual Serial

Technical Information

	S-VIDEO IN	1 set, Mini DIN 4p
		Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω, compatible with S1 signal
	VIDEO IN	1 set, BNC pin jack
		1.0 V [p-p], 75 Ω
		1 set, BNC x 5
		 RGB signal
		0.7 V [p-p], 75 Ω
	RGB 1 IN	• G-SYNC: 1.0 V [p-p], 75 Ω
		• HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible
		• VD: TTL high impedance, automatic positive/negative polarity compatible
		 YPBPR signal
		• Y: 1.0 V [p-p] Synchronisation signal included
		• PBPR: 0.7 V [p-p], 75 Ω
		1 set of high density, D-sub 15p (female)
		 RGB signal
Terminals		0.7 V [p-p], 75 Ω (G-SYNC: 1.0 V [p-p], 75 Ω)
	RGB 2 IN	• HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible
		• VD: TTL high impedance, automatic positive/negative polarity compatible
		 YPBPR signal
		• Y: 1.0 V [p-p] Synchronisation signal included
		• PBPR: 0.7 V [p-p], 75 Ω
	DVI-D IN	1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible
	SERIAL	1 set, D-sub 9-pin, RS-232C compatible, computer control use
	REMOTE1	1 set, M3 pin jack, wired remote control use, multiple connection use
	REMOTE2	1 set, D-sub 9-pin, external control use
	LAN	1 set, RJ-45, network connection use, PJLink™ compatible,
		10 Base-T/100Base-TX
		1 set, BNC	• SMPTE292M: 720/50p, 720/60p, 1 035/60i,
	SDI	SD-SDI (Y, CB, CR, 4:2:2)	1 080/50i, 1 080/60i, 1 080/25p, 1 080/24p,
		• SMPTE259M: 480i, 576i	1 080/24sF, 1 080/30p
Cabinet		Moulded plastic
Mains lead length		3.0 m (9'10")
		Width	498 mm (19- 19/32")
Dimensions		Height	175 mm (6 - 7/8")
		Length	440 mm (17 - 5/16")
Weight		Approx. 16 kg (35.3 lbs.)*6
	Power supply	3 V DC (AA battery x 2)
	Operating range	Approx. 30 m (98'5") (when operated directly in front of signal receptor)
Remote	Weight	120 g (4.2 ozs.) (including batteries)
control		Width	51 mm (2')
	Dimensions	Length	176 mm (6 - 29/32")
			22.7 mm (-7/8") (not including surface projection
		Height
			parts)
	Ceiling bracket	ET-PKD56H (High ceiling), ET-PKD55S (Low ceiling)
Options	Projection lens	ET-DLE150, ET-DLE250, ET-DLE350, ET-DLE450, ET-DLE055
	Lamp unit	ET-LAD60 (1 bulb), ET-LAD60W (2 bulbs)
	ACF unit	ET-ACF100

*1. When STANDBY MODE in PROJECTOR SETUP menu is NORMAL: Approx. 9 W When STANDBY MODE in PROJECTOR SETUP menu is ECO: Approx. 0.3 W

*2. Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.

*3. When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be 5 °C lower than this higher limit.

*4. See “List of compatible signals” on page 34 for available signals.

*5. When using the ET-DLE055 lens, maximum projection size is 200 inch.

*6. Average value. Each product (inc. lens) has an individual variable in weight.

Appendix

ENGLISH - 37