Technical Information
ENGLISH - 35
Appendix
Display dots of each model
WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 A
D/R1 920 x 1 080*9 1 920 x 1 080 66.6 59.9 138.5 AA*5
WUXGA*9 1 920 x 1 200 74.0 60.0 154.0 AA*8 DD
*1. The “i” appearing after the resolution indicates an interlaced sign al. Flicker (line flicker) may be caused in images if interlace is con-
nected.
*2. The following symbols are used to indicate picture quality.
AA Maximum picture quality can be obtained.
A Signals are converted by the image processing circuit before picture is projected .
B Some loss of data occurs to make projection easier.
*3. Where marked “D” signals indicates in Plu g and Play is compatible with EDID of projector.
Unmarked signals in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play is
unmarked and nothing is written in the format list, difficulties in projecting image may occur even when computer and projector
appear to have same resolution.
*4. The following symbols are used to indicate the format .
V = VIDEO, S = S-VIDEO, D = DVI, R = RGB, Y = YPBPR
SDI is only for the PT-DZ6710E.
*5. PT-DW6300E/PT-D6000E/PT-D5000E: A
*6. PT-DZ6710E/PT-DZ6700E/PT-D6000E/PT-D5000E: A
*7. PT-DZ6710E/PT-DZ6700E/PT-DW6300E: A
*8. PT-DW6300E/PT-D6000E/PT-D5000E: B
*9. VESA CVT-RB (Reduced Blanking) compatible.
NOTE:
• Projecting an interlaced signal may cause flicker in screen.
PT-DZ6710E 1 920 x 1 200
PT-DZ6700E 1 920 x 1 200
PT-DW6300E 1 280 x 800
PT-D6000E/PT-D5000E 1 024 x 768
Mode Display
resolution
(dots)*1
Scanning
frequency Dot clock
frequency Picture
quality*2
PnP*3
Format*4
H (kHz) V (Hz) (MHz) RGB2 DVI-D
EIDI1 DVI-D
EIDI2