Panasonic D6KE manual  Removing and replacing the lamp unit, Lamp unit cover fixing screw, Handle

Replacement

Replacement procedure

Removing and replacing the lamp unit

1.Use a Phillips-head screwdriver to loosen the “lamp unit cover fixing screw” (1 screw) on the back of the projector until the screws turn freely, and remove the lamp unit cover.

Slide the lamp unit cover to the control buttons and pull to remove.

4.Hold the handle of the new lamp unit and replace it in correct direction.

5.Press in the lamp unit until it clicks and make sure the unit is installed securely.

6.Tighten the “lamp unit fixing screws” (3 screws) securely with a Phillips-head screwdriver.

Lamp unit cover fixing screw

Lamp unit cover

2.Use a Phillips-head screwdriver to remove the “lamp unit fixing screws” (3 screws).

3.Hold the handles of the lamp unit and pull the used lamp unit gently from the projector.

Lamp unit fixing screws Handle

Fan electric power connector

7.Attach the lamp unit cover and tighten the “lamp unit cover fixing screw” (1 screw) securely with a Phillips-head screwdriver.

Slide the lamp unit cover to the hinge side along the guide and push in to attach securely.

Make sure the fan electric power connector of the lamp unit cover is inserted securely to the projector’s connector.

Handle Lamp unit fixing screws

NOTE:

•The lamp unit and the lamp unit cover must be attached correctly and securely. Failure to do so, the projector will bot be turned on for the protection circuit.

•When the lamp unit is replaced, the duration of usage time will be reset to "0".

Maintenance

ENGLISH - 31