Panasonic D6KE, PT-DW6300K manual  Side views, About Your Projector

Side views

S-VIDEO IN

Connect an S-VIDEO signals. (Mini DIN 4 pin)

VIDEO IN

Connect a video signals. (BNC)

LAN

Connect a LAN cable for network connection.

(RJ-45)

About Your Projector

RGB 1 IN

Connect an RGB or YPBPR signals. (3, 4 or 5 wire BNC)

RGB 2 IN

Connect an RGB or YPBPR signals. (D-SUB 15 pin female)

DVI-D IN	Preparation
Connect a single link DVI-D signals.
(DVI-D 24 pin)

REMOTE 1 IN/OUT When two or more main units are used in the system, they can be connected and controlled with wired remote control cable.

(M3 jack)

REMOTE 2

Connect a cable from an external control circuit. (D-sub 9 pin female)

SERIAL IN/SERIAL OUT Connect an RS-232C cable from/to a computer.

SDI IN (PT-DZ6710E only) Connect a cable from a computer.

(BNC)

Air intake port

POWER button

Switch the projector on/off. (page 19)

Air intake port

AC IN terminal

Connect the main lead to supply electronic power to the projector. (page 19)

Security lock

Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kensington MicroSaver Security System.

Auto Cleaning Filter (ACF) compartment (page 32)

NOTE:

•Switch on the POWER button of the projector body that is located near the terminals before using the control buttons.

•Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to do so may cause malfunctions. Do not touch the metallic parts of LAN terminal and cable.

•Please connect the LAN to indoor devices only.

ENGLISH - 13