Panasonic PT-FW300U, PT-FW300NTU Using the laser pointer, Controlling the volume of the speaker

Remote control operation

Using the laser pointer

You can highlight items on the screen with the red laser pointer while projecting the image in presentations or visual demonstrations as an eye-catching pointing device.

Hold down the LASER button to go on the laser pointer and release to go off.

Top view	Deactivating switch
	On
	Off

Laser pointer beam emitter

Disable the LASER button

You can disable the LASER button for an accidental operation.

1.Open the battery compartment cover of the remote control.

2.Slide the switch tab.

3.Close the battery compartment cover of the remote control.

See “Battery compartment” on page 14.

NOTE:

•If you press the disabled LASER button, the alert

"LASER POINTER IS DISABLED." will be displayed on the screen. While the menu is displaying, the alert will not be displayed.

Cautions

(Shown as PT-FW300NTU)

CAUTION: Use of controls of adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Operation

NOTE:

•The laser pointer should never be projected directly into the eyes of a person or animal.

•Do not aim the laser at reflective surfaces.

•Do not allow children to use laser pointer.

•Never look directly into the laser beam.

•The laser pointer is not effective with translucent screens.

•Please read the cautions on the remote control.

•This is a Class 2 laser product.

Controlling the volume of the speaker

You can control the volume of the built-in
speakers and output sound. Press "+" side of the	NOTE:
VOLUME button to increase and "-" to decrease.	• Power consumption can be reduced if the volume level
	is lowered.

Basic

ENGLISH - 29