Panasonic PT-FW300NTU manual Display Option menu, Dvi-D, ON-SCREEN Display, Closed Caption Setting

When project on a 16:10 or 4:3 screen.

When project on a 16:9 screen.

DISPLAY OPTION menu

Remote control Control panel

See “Navigating through the menu” on page 32. See “Main menu and Sub-menu” on page 30.

DVI-D IN

NOTE:

•The DVI-D IN setting for the best quality depends on the output equipment. Refer the instructions of the connected equipment.

•DVI signal is very sensitive, and malfunction may occur or other problems could be encountered with some DVI equipment.

Settings

ON-SCREEN DISPLAY

INPUT GUIDE

When you change the input method, the guidance appears in the upper right corner of the screen. The following display methods are available. Press I H to cycle through the options.

Options	Function
	Display the input method by graphic.
	The INPUT GUIDE will go out after
	3 seconds without any operation.
DETAILED	If you select any COMPUTER or DVI
	terminal which has no signal, the
	computer connection guidance will
	be displayed. See “Computer
	connection guidance” on page 54.
	Display the input method by text.
SIMPLE	The INPUT GUIDE will go out after
	3 seconds without any operation.
OFF	Turn off the guidance.

OSD DESIGN

You can change the background color of the menu. Press I H to select the required option.

TYPE1	Semi transparent black
TYPE2	Solid blue
TYPE3	Semi transparent dark blue

WARNING MESSAGE

You can let display only the minimum warning messages and hide others.

ON	All of the warning messages will be
	displayed.
OFF	Only the minimum warning
	messages will be displayed.

DVI EDID

You can switch the EDID setting and signal level for variable DVI signals.

EDID1	480p, 576p, 1 080/60i, 1 080/50i,
	720/60p, 720/50p, 1 080/60p,
	1 080/50p
EDID2(PC)	VGA60, SVGA60, XGA60, XGA70,
	XGA75, WXGA768/60, SXGA60,
	SXGA60+, WXGA800/60

DVI SIGNAL LEVEL

0-255:PC(PC scale) For connecting to a computer via DVI-D IN terminal.

16-235(TV scale) For connecting to AV equipment via DVI-D IN terminal, such as DVI - HDMI connection.

CLOSED CAPTION

SETTING

If the input signal contains closed captions, you can turn on the feature and switch the channels.

CLOSED CAPTION

OFF	Deactive
ON	Active

MODE

CC1 - 4 Change the channels CC1 - 4

NOTE:

•VCR with TBC (Time Base Corrector) function is recommended for video cassette tapes.

SCREEN SETTING

SCREEN FORMAT

Select the required screen format by pressing I H.

16:10

16:9

NOTE:

•When the WARNING MESSAGE is set to OFF, use the projector with utmost care due to the most of warning messages will not be displayed.

ENGLISH - 38