SECURITY menu
Settings
Remote control | Control panel |
See “Navigating through the menu” on page 32. See “Main menu and
Entering the SECURITY menu
Every time when you apply to the SECURITY menu, you will be asked to perform the password operation.
PICTURE | PASSWORD | OFF | |
POSITION | |||
PASSWORD CHANGE |
| ||
LANGUAGE |
| ||
TEXT DISPLAY | OFF | ||
DISPLAY OPTION | |||
TEXT CHANGE |
| ||
PROJECTOR SETUP |
| ||
MENU LOCK | OFF | ||
SECURITY | |||
MENU LOCK PASSWORD |
| ||
NETWORK |
| ||
CONTROL DEVICE SETUP |
| ||
|
| ||
| PASSWORD |
| |
RETURN |
|
| |
ENTER |
|
|
When you apply to the SECURITY menu before you change the password to your original, perform to input the following factory default password operation.
Press F H G I F H G I and the ENTER button.
After you change the password
When you apply to the SECURITY menu after you change the password to your original in the PASSWORD CHANGE menu, input the original password operation.
NOTE:
•The factory default password is valid until you change the password in PASSWORD CHANGE menu.
•The entered password operations will appear as asterisks in the box.
PASSWORD
You can activate the security system and the password operation will be asked to perform when the projecting mode started. Unless you perform the correct password operation, all of the button controls will be disabled except the power button.
OFF | Deactive |
ON | Active |
PASSWORD CHANGE
You can change the password operation to your original.
1.Press a series of button operation up to 8 as a password by using F G I and H.
2.Press the ENTER button.
3.Press the exact same series of button operation you entered in the NEW password box for confirmation.
If a series of button operation is incorrect, you will be asked to perform again.
4.Press the ENTER button.
NOTE:
•The entered password operations will appear as asterisks in the box.
TEXT DISPLAY
You can set your original text, such as company name or URL information, to display regularly at the bottom of the projected image while projecting.
OFF | Deactive |
ON | Active |
TEXT CHANGE
You can enter your original text up to 22 characters for
TEXT DISPLAY.
TEXT CHANGE
| ALL DELETE |
| SPACE |
OK | CANCEL |
1. Enter your original text.
Use F G I H to specify the location of the required character.
Move the cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicated with the cursor in the text line. To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 2.
2. Press the ENTER button.
The selected character will be displayed in the TEXT CHANGE box.
|
| 3. Repeat until finish your original text. | |
NOTE: | |||
4. Select OK and press the ENTER button to set the | |||
• | When you activated the security system, make sure to | ||
entered text. | |||
| change the password to your original for safety. | ||
| Select CANCEL or press the MENU/RETURN | ||
• | The factory default password is valid until you change | ||
buttons to return to the previous menu. | |||
| the password in PASSWORD CHANGE menu. | ||
|
| ||
|
|
| |
