Switching the projector on/off
Power cord
Connecting | Disconnecting |
1.Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.
1.Unplug the power cord from the wall outlet.
2.Depress the latch and slide the cover off.
2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.
Rail guide
3.Place the latch to the latch catcher and press until it clicks.
Latch 
4. Connect the power cord to a wall outlet.
Latch 
3.Slide the power cord secure lock up along the side guide rail and remove.
Rail guide
4.Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector.
Power indicator lights in orange if the internal cooling fan is still operating by internal power supply.
Basic Operation
NOTE:
•Do not use other than the provided power cord.
•Ensure all the input devices are connected and turned off before connecting the power cord.
•Do not force the connector as this may damage the projector and/or the power cord.
•Dirt or dust
•Switch off the power to the projector when not in use.
•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.
Direct power on function
You can start the projection with only supplying the electric power. See “INITIAL START UP” on page 41.
Direct power off function
You can switch off the electric power supply any time by unplugging the power plug from the wall outlet or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.
