16-ENGLISH
(continued from previous page)
Connector panel
#SERIAL connector (pages 21, 22, 23 and 70)
This connector is used to connect a personal computer to the projector in
order to control the projector externally. (RS-232C compatible)
$PC 1 IN connector (pages 21 and 22)
This connector is used to input RGB signals and YPBPRsignals.
1DIRECT INPUT SELECT buttons (pages 27 and 30)
You can select the input signal directly by pushing these buttons.
2SHUTTER button (page 32)
This button is used to momentarily turn off the picture and sound. You can
also select this function from the on-screen menu (refer to page 53).
3DEFAULT button (page 39)
This button is used to reset the projector adjustment values to the factory
default settings.
4VOLUME +/- buttons (page 32)
These buttons are used to adjust the volume of the sound that is output
from the projector’s built-in speaker and VARIABLE AUDIO OUT
connector. Refer to page 52 for details on how to adjust the volume
without using the remote control unit.
5DIGITAL ZOOM +/- buttons (page 33)
These buttons are used to enlarge the projected image.
#$%&'(
)
,*
+