Displaying the input source information
You can display the audio and video information of the current input signal.
1Set the operation mode selector to FAMP and then press HSET MENU on the remote
control.
The top “SET MENU” display appears in the OSD.
SET MENU
.;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[p]/[p]:Up/Down [ENTER]:Enter
2Press 9n repeatedly to select “SIGNAL
INFO” and then press 9ENTER.
The audio information about the input source appears in the OSD.
3Press 9l / h to toggle between the audio and video information displays.
4Press HSET MENU on the remote control again to exit from “SET MENU”.
■Audio information
Information | Descriptions |
FORMAT | Signal format. When this unit cannot detect a |
| digital signal, it automatically switches to |
| analog input. |
|
|
SAMPLING | The number of samples per second taken from |
| a continuous signal to make a discrete signal. |
|
|
CHANNEL | The number of source channels in the input |
| signal (front/surround/LFE). For example, a |
| |
| channels, 2 surround channels and LFE, is |
| displayed as “3/2/0.1”. |
|
|
BITRATE | The number of bits passing a given point per |
| second. |
|
|
FLAG | Flag data encoded in DTS, Dolby Digital, or |
| PCM signals that cue this unit to automatically |
| switch decoders (“Surround EX”, etc.). |
|
|
Playback
■Video information
Information | Descriptions |
|
|
HDMI SIGNAL | Type of the source video signals and |
| the video signals output at the HDMI |
| OUT jack of this unit. |
|
|
HDMI RES. | Resolution of the input signal (analog |
| or HDMI) and the output signal |
| (HDMI). When input video signals are |
| composite video or |
| the input video signals are indicated as |
| “Composite” or |
|
|
ANALOG RES. | Resolution of the analog video signals |
| output at the COMPONENT VIDEO |
| MONITOR OUT jacks of this unit. |
|
|
HDMI ERROR | Error message for HDMI sources or |
(HDMI MESSAGE) | connected HDMI devices. |
|
|
Note
HDMI error and message
MessageCause
DEVICE OVER The number of the connected HDMI components is over the limit.
HDCP ERROR HDCP authentication failed.
Out of Res. Out of resolution. The connected monitor is not compatible with the resolution of the input video signal.
OPERATION | BASIC |
|
|
Note
English
