Yamaha DSP-AX863SE 74 En, Low-frequencyeffect level, Speakers SPEAKER, Headphones HEADPHONE

Customizing this unit (MANUAL SETUP)

■Low-frequency effect level

B)LFE LEVEL

Use this feature to adjust the output level of the LFE (low- frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective when the input signal contains the LFE channel.

Control range: –20 to 0 dB

Control step: 1 dB

B)LFE LEVEL

. SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

[[ p Up/Down

[p]/[[]: Adjust

Speakers SPEAKER

Adjusts the speaker LFE level.

Headphones HEADPHONE

Adjusts the headphone LFE level.

Note

Depending on the settings of “LFE/BASS OUT” (see page 68), some signals may not be output at the SUBWOOFER PRE OUT jack.

■Dynamic range C)DYNAMIC RANGE

Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding bitstream signals.

C)DYNAMIC RANGE

SPEAKER;;;;;;;;;MAX

. HEADPHONE;;;;;;;MAX

[[ p Up/Down

[p]/[[]: Select

Speakers SPEAKER

Adjusts the dynamic range compression for the speakers.

Headphones HEADPHONE

Adjusts the dynamic range compression for the headphones.

Choice	Functions
MIN/AUTO	• MIN: Adjusts the dynamic range to narrow
	when this unit is decoding bitstream signals
	(except Dolby TrueHD).
	• AUTO: Adjusts the dynamic range according
	to the instruction of the input source signals
	when this unit is decoding Dolby TrueHD
	signals.
STD	Adjusts the dynamic range to medium. When
	this unit is decoding Dolby TrueHD signals, the
	dynamic range control is always active
	regardless of the instruction of the input source
	signals.
MAX	Preserves the greatest amount of dynamic range.

74 En