Selecting the SCENE templates
This unit is equipped with 17 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button (see page 8):
SCENE 1: DVD Movie Viewing
SCENE 2: Music Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select the desired SCENE templates from the SCENE template library and assign the templates to the selected SCENE buttons on the front panel and the remote control.
Select the desired SCENE template
| 1 |
| Assign the |
| SCENE |
SCENE template library | template to the |
(Image) | SCENE button |
Selecting the desired SCENE template to the SCENE buttons
1Press and hold the JSCENE (or 4SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the front panel starts to flash, and the name of the currently assigned SCENE template appears in the front panel display.
3 seconds |
| 3 seconds |
1 | or | 1 |
|
| |
Front panel |
| Remote control |
|
|
2Rotate the IINPUT selector (or set the operation mode selector to FAMP and then press 9l / h) to select the desired
template.
DVD Viewing
3Press the JSCENE (or 4SCENE) button again to confirm the selection.
The selected SCENE template is assigned to the SCENE button.
1 | or | 1 |
Front panel |
| Remote control |
|
|
Note
Once the desired SCENE templates are assigned to the corresponding SCENE buttons, you need to set the input source of the SCENE template on the remote control. See page 40 for details.
1
Flashes
