Yamaha DSP-AX863SE owner manual Customizing this unit MANUAL SETUP, 63 En, Auto setup AUTO SETUP

Customizing this unit (MANUAL SETUP)

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■Auto setup AUTO SETUP

Use this feature to automatically adjust speaker and system parameters (see page 31).

■Manual setup MANUAL SETUP

Use this feature to manually adjust speaker and system parameters.

Basic menu 1 BASIC MENU

Menu	Parameter	Functions	Page
A)SPEAKER SET	EXTRA SP ASSIGN	Selects the function of the speakers connected to the EXTRA SP	68
		speaker terminal.
	LFE/BASS OUT	Selects the speakers that output the LFE (low-frequency effect) and the	68
		low-frequency signals.
	FRONT SP	Selects the size of the front speakers.	69
	CENTER SP	Selects the size of the center speaker.	69
	SUR. L/R SP	Selects the size and number of the surround speakers.	69
	SUR.B L/R SP	Selects the size and number of the surround back speakers.	69
	CROSS OVER	Selects the crossover frequency of all the speakers set to “SML” (or	70
		“SMALL”) in “SPEAKER SET” (see page 69).
	SUBWOOFER PHASE	Switches the phase of your subwoofer if bass sounds are lacking or	70
		unclear.
B)SP LEVEL	FR.L/FR.R/CNTR/	Adjust the balance the speaker levels between the front left or	70
	SUR.L/SUR.R/	surround left speakers and each speaker selected in “SPEAKER SET”
	SBL/SBR/SWFR/	(see page 68).
	PR.L/PR.R
C)SP DISTANCE	UNIT	Selects the unit to adjust the speaker distance.	71
	FRONT L/FRONT R/	Adjust the distance of each speaker and the delay applied to the	71
	CENTER/SUR. L/	respective channel.
	SUR. R/SBL/SBR/
	SWFR/PRNS L/
	PRNS R
D)TEST TONE	—	Turns the test tone output on or off for the “SPEAKER SET”, “SP	71
		LEVEL”, and “SP DISTANCE” settings.

OPERATION ADVANCED

English

63 En