Connections
VIRTUAL indicator
Lights up when the Virtual CINEMA DSP mode is active (see page 50).
SILENT CINEMA indicator
Lights up when headphones are connected and a sound field program is selected (see page 50).
EMulti-information display
Shows the name of the current sound field program and other information when adjusting or changing settings.
FSLEEP indicator
Lights up while the sleep timer is on (see page 46).
GInput channel and speaker indicators
LFE indicator
LFE | Presence speaker indicators |
| |
L C R |
|
SL SB SR | Input channel indicators |
|
SBL SBR
Input channel indicators
•Indicate the channel components of the current digital input signal.
•Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (see page 31) or in the “BASIC MENU” in “MANUAL SETUP” (see page 70).
Presence speaker indicators
Light up or flash according to the setting of “EXTRA SP ASSIGN” when this unit is in the automatic setup procedure (see page 31) or in the “BASIC MENU” in “MANUAL SETUP” (see page 68).
y
You can make settings for the presence and surround back speakers automatically by running “AUTO SETUP” (see page 31) or manually by adjusting settings for “SUR.B L/R SP” (see page 69) in “SPEAKER SET”.
Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
Remote control sensor
Approximately 6 m | 30 | 30 |
|
Infrared window (1)
Outputs infrared control signals. Aim this window at the component you want to operate.
Transmit indicator (2)
Flashes while the remote control is sending infrared signals.
Display window (6)
Shows the name of the selected input source that you can control.
Operation mode selector (F)
The function of some buttons depends on the operation mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input selector button (see page 84).
TV
Operates the TV assigned to either DTV/CBL or PHONO (see page 83).
Notes
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–places of high humidity, such as near a bath
–places of high temperatures, such as near a heater or stove
–places of extremely low temperatures
–dusty places
•To set the remote control codes for other components, see page 85.
