Remote control features
2Press and hold CLEARN for about 3 seconds using a ballpoint pen or similar object.
The library name (e.g. L;DVD) and the name of the selected control area (e.g. DVD) appear alternately in the display window (6) on the remote control.
LEARN
y
•You can set a remote control code of a different type of component to an control area. Press 9l / h repeatedly to change the library (component category).
Library choices: L;DVD, L;DVR, L;LD, L;CD, L;CDR, L;MD, L;TAP (tape), L;TUN (tuner), L;AMP, L;TV, L;CAB (cable), L;SAT (satellite), L;VCR
•If you want to setup for another control area, press the input selector button, or press 6SELECT k / n repeatedly to select the control area.
Notes
•Be sure to press and hold CLEARN for at least 3 seconds, otherwise the learning process will start.
•If you do not complete each of the following steps within 30 seconds, the setting mode will be automatically canceled. In this case, start over from step 2.
3Press 9ENTER.
The
Note
“0000” appears in the display window (6) if no code has been set.
4Press the numeric buttons (A) to enter the
For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
1 2 3 4
STEREO ENHANCER SUR. DECODE PARAMETER
5 6 7 8
MULTI CH IN
90
5Press 9ENTER to set the number.
“OK” appears in the display window (6) on the remote control if setting was successful.
“NG” appears in the display window (6) on the remote control if the setting was unsuccessful. In this case, start over from step 3.
y
If you continuously want to set up another code for another component, press the input selector button (5), or
6SELECT k / n repeatedly to select the component, then repeat steps 2 through 5.
6Press CLEARN again to exit from the setup mode.
LEARN
7Press Bp or 3AV POWER to confirm whether you can control your component using the remote control.
POWER
or AV
y
If operation is not possible and the manufacturer of your component has more than one code, try each of them until you find the correct one.
Notes
•“ERROR” appears in the display window (6) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.
•The supplied remote control does not contain all possible codes for commercially available audio and video components (including Yamaha components). If operation is not possible with any of the remote control codes, program the new remote control function using the learn feature (see “Programming codes from other remote controls” on page 87) or use the remote control supplied with the component.
•Functions programmed using the learn feature take priority over remote control code functions.
