Yamaha DSP-AX863SE owner manual Using your headphones, Muting the audio output, 44 En, Notes

Playback

Using your headphones

Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.

							VOLUME
	SPEAKERS
			SCENE
	1	2		3	4
	PROGRAM				INPUT
PHONES	TONE CONTROL	STRAIGHT	PURE DIRECT	AUDIO SELECT	OPTIMIZER MIC		VIDEO AUX
STANDBY
/ON
SILENT CINEMA		EFFECT			S VIDEO	VIDEO	L AUDIO R	OPTICAL

y

When you select a sound field program, SILENT CINEMA mode activates automatically (see page 50).

Notes

•When you connect headphones, no signals are output at the speaker terminals.

•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

Muting the audio output

Press GMUTE on the remote control to mute the audio output.

Press GMUTE again to resume the audio output.

y

•You can also rotate BVOLUME (or press GVOLUME +/–) to resume the audio output.

•You can adjust the muting level by using the “MUTE TYPE” parameter in “VOLUME MENU” (see page 72).

•The MUTE indicator flashes in the front panel display when the audio output is muted and disappears from the front panel display when the audio output is resumed.

Before performing the following operations, set the operation mode selector on the remote control to FAMP.

Playing video sources in the background of an audio source

You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Press the input selector buttons (5) on the remote control to select a video source and then an audio source.

Audio sources TUNER

	V-AUX/DOCK	DTV/CBL	CD	MD/CD-R
Video sources	DVD	DVR	VCR	PHONO
	V-AUX/DOCK	DTV/CBL
Video sources	DVD	DVR	VCR	PHONO
	MULTI CH IN
Audio sources	9

y

•You can also select “MULTI CH” as the audio source (see page 42). Set the operation mode selector to FAMP and then press PMULTI CH IN.

•Set the “BGV” parameter in the “MULTI CH” menu to the desired setting to select the default background video input source of the MULTI CH INPUT sources (see page 78).

44 En