OPERATION WITH THE REMOTE CONTROLLER 
1. Operation
STEP 2
STEP 3
STEP 4 
STEP 1 STEP 5 
NOTE |
| Check that the circuit breaker on the power panel is | ||||
|
| turned on. |
|
|
| |
|
|
|
|
| ||
|
| Press the setting buttons as described below and | ||||
|
| change the settings as desired. |
|
| ||
|
|
|
|
| ||
|
| STEP 1 | Press the MODE selector button |
| ||
|
|
| and select the desired mode. |
| ||
|
|
| For dehumidifying operation | ο | ||
|
|
| For cooling operation |
| ο | |
|
|
| For fan only operation |
| ο | |
|
|
|
| |||
|
| STEP 2 | To start the air conditioner, press the ON/ | |||
|
|
| OFF operation button. |
|
| |
|
|
|
| |||
|
| STEP 3 | Press the TEMP. setting buttons to change | |||
|
|
| the temperature setting to the desired |
| ||
|
|
| temperature. |
|
|
|
|
|
| Adjustable temperature range: |
| ||
|
|
| 30 °C max. | or | 86 °F max. |
|
|
|
| 16 °C min. |
| 60 °F min. |
|
|
|
|
| |||
|
| STEP 4 | Set the FAN SPEED selector button to the | |||
|
|
| setting you want. |
|
|
|
|
|
|
| |||
|
| STEP 5 | Press the FLAP button and set the airflow | |||
|
|
| direction as desired. |
|
| |
|
|
| (Refer to “ADJUSTING THE AIRFLOW | |||
|
|
| DIRECTION” on page 12.) |
| ||
|
|
|
|
| ||
|
| To stop the air conditioner, press the ON/OFF |
| |||
|
| operation button again. |
|
|
| |
| • Choose the best position in the room for the remote | |||||
NOTE |
| |||||
|
| controller, which also acts as the sensor for room | ||||
|
| |||||
|
| comfort and transmits the operating instructions. | ||||
|
| Once you’ve found this best position, always keep the | ||||
|
| remote controller there. |
|
|
| |
•This appliance has a
2. Adjusting the Fan Speed
A. Automatic fan speed
Simply set the FAN SPEED selector button to the 
position.
This automatically sets the best fan speed for the room temperature.
B. Manual fan speed
If you want to adjust fan speed manually during operation,
just set the FAN SPEED selector button as desired. [ 
,
, or 
]
3. Fan Only
STEP 2
STEP 3 
STEP 1
If you want to circulate air without any temperature control, follow these steps:
STEP 1 Press the MODE selector button to switch to
the fan mode 
.
STEP 2 | Press the ON/OFF operation button. |
|
|
STEP 3 | Press the FAN SPEED selector button to |
| select the fan speed of your choice ( , |
| or ). |
9
