Panasonic R410A Remote Controller Installation Position, Mounting on a Wall, Hole, Fig

Models: R410A

1 112
Download 112 pages 20.27 Kb
Page 91
Image 91
5. Remote Controller Installation Position

5. Remote Controller Installation Position

The remote controller can be operated from either a non-fixed position or a wall-mounted position.

To ensure that the air conditioner operates correctly, do not install the remote controller in the following places:

In direct sunlight

Behind a curtain or other place where it is covered

More than 26' (8 m) away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic interference

Where there is an obstacle between the remote con- troller and the air conditioner (since a check signal is sent from the remote controller every 5 minutes)

5-1. Mounting on a Wall

Before mounting the remote controller, press the ON/OFF operation button at the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Rear side

Remote control holder 5-1. Mounting on a Wall

Rear side Press

Set in place

Mounting screws 5/32 Mounting screws 5/32  5/8" (4  16 mm) (included) 5/8" (4 Hole 16 mm) (included)

Hole

To prevent loss of the remote controller, you can connect the remote controller to the holder by passing a string through the remote controller and attachment hole.

To take out the remote controller, pull it forward.

Fig. 36

15

Page 91
Image 91
Panasonic R410A Remote Controller Installation Position, Mounting on a Wall, Rear side Remote control holder, Hole, Fig