Panasonic SA-XR59 manual Sound effects/Other functions

Sound effects

Adjusting the bass

2Select and confirm.

3 Adjust and confirm.	Adjustment range: -10dB to +10 dB
	Factory setting: 0 dB

2Select and confirm.

ENGLISH

Adjusting the treble

Adjusting front speaker balance

Adjusting the

subwoofer level

Adjust the subwoofer level while listening to a source for a more or lesser bass.

3	Adjust and confirm.		Adjustment range: -10dB to +10 dB
			Factory setting: 0 dB
2	Select and confirm.		L: Front left
			R: Front right
3	Adjust and confirm.		Note
			You cannot adjust the balance when the
	Use the bar as a guide.		“PARTY” SFC mode is on (➡ page 24).
		SUBWOOFER
Press		to select a level.
•	Factory setting: SUBW 20			Adjustment range: ---(off),
				MIN (minimum), 5, 10, 15, 20,
•	There is no output from the subwoofer if you select “---”.
				25, MAX (maximum)

Note

•Sound can be distorted if you raise the volume while subwoofer level is high. Reduce subwoofer level if this occurs.

•You can also make fine adjustments to subwoofer level (“Speaker output and level”, ➡ page 17).

Sound effects/Other functions

Other functions

Selecting audio

channels

“DUAL PRG” appears on the display when the unit is receiving a signal with dual audio channels.

2Select and confirm.

You can switch between the main and secondary audio soundtracks of Dolby Digital or DTS sources.

Adjusting the dimness

of the display

3Select the audio track and confirm.

2Select and confirm.

3Select a level and confirm.

MAIN: Main audio channel (factory setting)

SAP: Second audio program

M+S: Main and second channel

Adjustment range:

DIMMER 1 (bright) to DIMMER 3 (dim) Factory setting: OFF

Dim the display for better viewing in a darkened room.

•To return to the normal brightness, select “DIMMER OFF”. Press DIMMER

Sleep timer

•The sleep timer turns the unit off after a set time.

•It does not control any other components.

Muting

•The display dims to the level you have selected.

•Press again to cancel.

2	Select and confirm.	Times available: 30, 60, 90, 120 (minutes)
		Factory setting: OFF
3	Select the time and confirm.	• “SLEEP” lights when the timer is set.
		•	To check the setting:
			Select “SLEEP” again in Step 2.
		•	To change a setting:

Repeat the procedure from the beginning.

Press MUTING “MUTING IS ON” scrolls across the display while output is muted. Press again to cancel.

Muting also cancels when you adjust the volume or switch the unit to standby.

RQTV0247

31