Using the timers, Using the play timer

Using the timers

5		CLOCK	TIMER	4
		TIMER ADJ	ON/OFF
	DISPLAY	SLEEP	PGM/–CLEAR
	EQ	LIVE VIRTUALIZER PLAY MODE

AUX TUNER/BAND CD

TUNING MODE

VOLUME

Using the play timer

Remote control only

The play timer can be set to on at a certain time to wake you up.

Preparations:

•Turn the unit on and set the clock (A page 11).

•Prepare the music source you want to listen to: CD, radio or aux, and set the volume.

1Press [CLOCK/TIMER ADJ] to select the timer function.

Every time you press the button:

CLOCK ON TIME OFF TIME

Previous display

ON TIME: to set the start time

OFF TIME: to set the finish time

Setting the start and finish times

2During “ON TIME” display

(within 10 seconds or so)

1 Press [g/∂] or [µ/f] to select the start time. 2 Press [CLOCK/TIMER ADJ].

3During “OFF TIME” display

1 Press [g/∂] or [µ/f] to select the finish time. 2 Press [CLOCK/TIMER ADJ].

The start and finish times are now set.

Turning the timer on

4Press [TIMER ON/OFF] to display “rPLAY”

The settings are shown in the following order: start time → finish time

(The indicator doesn’t appear if the clock hasn’t been set.)

5Press [f] to turn the unit off.

The unit must be off for the timer to operate.

Play will start in the set condition at the set time with volume increasing gradually to the set level.

To cancel the timer

Press [TIMER ON/OFF] to clear the timer indicator from the display. The timer comes on at the set time everyday if the timer is on.

To change the settings (when the unit is on)

To change the play times

Do steps 1, 2, 3 and 5.

To change the source or volume

1.Press [TIMER ON/OFF] to clear the timer indicator from the display.

2.Make changes to the source or volume.

3.Do steps 4 to 5.

To check the settings (when the unit is off)

Press [CLOCK/TIMER ADJ].

The settings are shown in the following order:

start time→finish time→source→volume→current time

You can enjoy other sources after you have set the timer. Turn the unit off before the timer’s start time.

Note

•If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.

•If the unit is on, the timer will not function. The unit must be in the standby mode.

•If AUX is selected as the source, when the timer comes on, the system turns on and engages AUX as the source. If you want to playback from a connected unit, set that unit’s timer to the same time. (See the connected unit’s instruction manual.)