Panasonic SC-PT565 Assembling the speakers, Preventing the speakers from falling, Simple Setup

Simple Setup

Assembling the speakers

step1 Assembling the speakers

[PT565] [PT865]	Front speakers and surround speakers
[PT560]	Front speakers

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For assembly, use a Phillips-head screwdriver.

≥For optional wall mount, refer to page 8.

Make sure you have all the indicated components before starting assembly, setup, and connection.

[PT565] [PT865]	[PT565] 4 Stands	[PT560] 2 Stands
2 Front speakers and 2	≥2kstands with short cable:	≥2kstands with short cable:
Surround speakers	For front speakers	For front speakers
[PT560]	≥2kstands with long cable:
	For surround speakers
2 Front speakers
	[PT865] 4 Stands
	≥4kstands with short cable

[PT565] [PT865]	[PT565] [PT865]
4 Bases	16 screws
[PT560]	[PT560]
2 Bases	8 screws

Slide into the groove.

Tighten securely.

	Insert the wire fully.
	i: White
	j: Blue
Position the	Push!
cable between	Press into the groove.
the ridges.
	Tighten securely.
Leave about 90 mm

Speaker assembly option

Thread the speaker cable through	Attach the speaker.
the base.

Leave about 100 mm

You can remove and use the cable from the stand. To reattach the cable, refer to page 8.

Insert the wire fully. i: White

j: Blue

Push!

Press into the groove.

Tighten securely.

RQTX0099

∫Preventing the speakers from falling

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

String (not included)

Thread from the wall to the speaker and tie tightly.

		Approx.
Screw eye	Wall	150 mm
(not included)

Rear of the speaker

6