Simple Setup
Notes on speaker use
≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be negatively affected.
≥You can damage your speakers and shorten their useful life if you play |
sound at high levels over extended periods. |
≥Reduce the volume in the following cases to avoid damage: |
– When playing distorted sound. |
– When the speakers are reverberating due to a record player, noise |
from FM broadcasts, or continuous signals from an oscillator, test |
disc, or electronic instrument. |
Caution
≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
Caution
≥Do not touch the front netted area of the speakers. Hold by the sides.
Positioning
– When adjusting the sound quality. |
– When turning the unit on or off. |
If irregular colouring occurs on your TV
The center speaker is designed to be used close to a TV, but the picture may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetising function of the TV should correct the problem. If it persists, move the speakers further away from the TV.
e.g. Center speaker
DO
NOT
≥Do not stand on the base. Be cautious when children are near.
DO
e.g. Front speaker
DO
NOT
Speaker installation options
∫ Attaching to a wall |
| ∫ Fitting speaker stands (not included) | ||
You can attach all of the speakers (except subwoofer) to a wall. | [PT565] [PT865] Center speaker only | |||
|
| |||
≥The wall or pillar on which the speakers are to be attached | [PT560] Center and surround speakers only | |||
should be capable of supporting 10 kg per screw. Consult a | Ensure the stands meet these conditions before purchasing them. | |||
qualified building contractor when attaching the speakers to a | ||||
Note the diameter and length of the screws and the distance | ||||
wall. Improper attachment may result in damage to the wall and | ||||
between screws as shown in the diagram. | ||||
speakers. |
| |||
| ≥The stands must be able to support over 10 kg. | |||
1 Drive a screw (not included) into the wall. | ||||
≥The stands must be stable even if the speakers are in a high | ||||
|
| |||
| At least 30 mm | position. |
| |
‰4.0 mm |
| e.g. Center speaker |
| |
‰7.0 mm to 9.4 mm |
|
| ||
| Metal screw holes |
| ||
|
|
| ||
|
| For attaching to |
| |
Wall or pillar | 4.0 mm to 6.0 mm | speaker stands |
| |
|
| |||
2 Fit the speaker securely onto the screw(s) with the hole(s). | 5.0 mm, pitch 0.8 mm | |||
|
| |||
[PT565] [PT865] Front and surround | Center speaker | Plate thickness plus |
| |
speakers |
| 60 mm | ||
| 7.0 mm to 10 mm | |||
[PT560] Front speakers |
| |||
|
| |||
|
| Speaker stand | ||
Attach to a wall without the base and |
|
| ||
|
| (not included) | ||
the stand |
|
| ||
|
|
| ||
116 mm | 190 mm | ∫ Reattaching the speaker cable | ||
|
| |||
|
| Insert the cable from |
| |
|
| the bottom. |
| |
| [PT560] Surround speaker |
|
| |
RQTX0099
e.g.
DO
NOT
Leave about 90 mm
In this position, | Move the speaker |
the speaker will | so that the screw |
likely fall if moved DO | is in this position. |
to the left or right. |
|
Pull out the cable through the hole.
8
