6 Open the terminal cover.

OPEN

Projection

Slide the lock to the OPEN side and lift the projection with a finger to open.

7 Plug the DC plug into the

DC input terminal on the unit.

Status indicator

Flashing red: Charging in progress

Off: Charging complete

Setting the date and time

1 Set the mode dial to a position other than [OFF].

2 Select [YES].

3 Set the date and time.

To select settings

To change

 

numerical values

4 Enter the date and time.

This procedure is for setting the date and the time the very first time. For the setting procedure for the second and subsequent times (P.30).

VQT1M21 13

Page 13
Image 13
Panasonic SDR-SW20P Open the terminal cover, Plug the DC plug into DC input terminal on the unit, Enter the date and time