Software on the CD-ROM, Computer, With a | Panasonic SDR-SW20P

With a	1	Software on the CD-ROM

computer

The supplied CD-ROM contains the software below:

This CD-ROM can only be used on Windows computers.

Video editing software MotionSD STUDIO 1.3E

This software allows motion pictures and still pictures to be acquired from this unit, edited and output.

The acquired motion pictures and still pictures can also be attached to e-mail or edited and saved on DVD.

For information about how to use MotionSD STUDIO, read the PDF operating instructions.

DirectX (For Windows 2000)

To use MotionSD STUDIO, you must have Microsoft DirectX 9.0b or 9.0c. If it is not installed on your computer, install it as follows:

•Install DirectX when installing MotionSD STUDIO.

•Click [DirectX] in the Setup Menu to install.

●Depending on the operating environment, software applications supporting older versions of DirectX may not run properly after installing DirectX 9.0b or 9.0c. If this happens, contact the manufacturer of these applications.

(Your computer must support DirectX 9.0b or 9.0c.)

●We cannot guarantee proper operation of this unit if you use software other than that supplied.

70 VQT1M21

Image 70

Panasonic SDR-SW20P Software on the CD-ROM, Computer, With a, Video editing software MotionSD Studio 1.3E

Contents

Model No. SDR-SW20P/PC VQT1M21 Things You Should Know Thank you for choosing Panasonic Following Applies only in the U.S.A SDR-SW20P Important Safety Instructions Battery pack Lithium ion battery pack BatteryAC adaptor Precautions Camera and SD card sold separately temperature LCD monitor Indemnity concerning recording contentFor the purposes of these operating instructions Carefully observe copyright laws Underwater use Important Water resistanceWater resistance Care after underwater use Replacing the water-resistant packing Card/Battery door and terminal coverHandling Lens, microphone and speaker Contents Request for Service Notice USA Only Optional accessoriesAccessory Order Form Limited Warranty Closedoor. the card/battery Set the mode dial to OFF Opendoor. the card/batteryInsert the battery Quick guide Plug the DC plug into DC input terminal on the unit Open the terminal coverEnter the date and time Recording Set to Start recording Take picture Stop recording Set to Select and enter the picture to view During playback Tripod mounting hole AccessoriesParts identification CD-ROM Mode dial P.26 Handling Using as a grip belt Using the 2-way hand strap suppliedUsing as strap Parts identification and handling Using the LCD monitor Type of card Capacity Recommended Panasonic SD/SDHC Memory Cards as of DecemberSD Memory Card SD/SDHC Memory Card Precautions in handling Write-protecting cards To AC outlet Lever Press here Setup 1 ChargingSet the mode dial to OFF AC adaptor AC cable＊ If the status indicator does the following Does not flash Charging time and recordable time SetupRemaining battery capacity indication Charging time Approx hours 15 minutes Setup 3 Inserting/Removing SD Insert/Removecard. the SD Turning power ON/OFF from the LCD monitor Setup 4 Turning power ON/OFF Selecting modesSet to icon of desired mode When not in use, set the mode dial to OFF Indicator Make settings from the menus. P.28Setting Quick Start Quick starts Select the top menu Setup 5 Setting from the menuDisplay the menu To return to the previous screen Using the cursor buttons Select an item Enter the selected item Close the menu To change the date and time display Setting the date and timeSet to or Select the desired menu Format Selectitem. and adjust Adjusting the LCD monitorAdjusting the LCD monitor Changing the display language Taking pictures underwater Recording 1 Before recordingBasic stance Hold the unit firmly with both hands Card/battery door Automatic recording motion/still pictures Set to Recording 2 Automatic recording motion picturesPress Start recording To change recording mode Recording mode and recording timesIf recording stops To remove shutter sound Recording 3 Automatic recording still picturesSet to Press Take picture →ADVANCED→SHTR EFFECT→OFF To change picture quality Picture qualityTo avoid jitter Enlarging zoom Enlarge RestoreRecording 4 Zoom/avoid jitter/maintain To enlarge further Apply zoom effect to sounds zoom microphone Picture brightness in dark locationsAvoid jitter image stabilizer function →ADVANCED→ZOOM MIC→ON Display operation icons Recording 5 Other recording optionsChange operation icons Fade-in/Fade-out →ADVANCED→FADE COLOR→WHITE / Black Backlight compensation function Self-timerRecording 5 Othercont. recording options To quit halfway through Soft skin mode MagicPix function Set to or Adjusting focus manually manual focus adjustmentRecording 6 Recording manually motion/still pictures To return to automatic recording Using situation-specific settings scene mode To cancel the setting Setting manually Achieve natural colors white balance To return to automatic adjustment Set to or ＊ Auto white balance range To return to automatic adjustment Adjusting shutter speed shutter speedShutter speed adjustment range Adjusting brightness iris/gain Iris/gain value adjustment range To cancel Setting home city and regionSetting the city and region of your travel destination Recording 7 Useful functions Avoid wind noise wind noise reduction function Restoring local date and time after returning home→BASIC→GUIDE LINES→ON Select the desired scene To adjust the volumePlayback 1 Viewing motion pictures Enter the picture to view Displaying thumbnails by date Select the date to display Slow-motion playback PlaybackFast forward/rewind playback Frame-by-frame playback Playback 2 Viewing still pictures Set to Enter the picture to view Set to or To cancel deletion halfway throughEditing 1 Deletingpictures motion/still Deleting one picture at a time Deleting all pictures Deleted pictures cannot be restoredSelecting and deleting multiple pictures Formatting cards →SETUP→FORMAT CARD→YESPreventing accidental deletion →EDIT Scene →PICT. SETUP→DPOF SET→SET Setting Dpof for stillDpof SET→CANCEL ALL Pictures Products →SETUP→EXT. DISPLAY→ONWith other 1 Playback on TV To display LCD monitor information on TV Or DVD recorders Copying pictures using the AV cable suppliedCopying to video recorders With other Printing pictures from PictBridge printers Available settings Print settingsTo cancel printing PRINT→YES Supported discs 12 cm disc Using DVD burnersRequired equipment as of December Time required for copying Reference Connecting this unit and a DVD burner Copying still pictures to discs To cancel copyingCopying all motion pictures to discs Copying selected motion pictures to discs Select Scenes Select Date Copying using a DVD burner Deleting copied motion pictures Playing back discsExiting →EDIT SCENE→DELETE →COPIED →YES With a Software on the CD-ROMComputer Video editing software MotionSD Studio 1.3E Agreement End User LicenseEnd User License Agreement Operating environment Operating environment required for MotionSD Studio Microsoft Windows XP Home Edition/Professional Installing MotionSD Studio If the Setup Menu does not start up automatically Uninstalling the software Using MotionSD Studio Importing motion pictures and still pictures Click in the lower right- hand corner of the screen Editing motion pictures and still picturesClosing MotionSD Studio From the SD Browser screen Disconnecting the unit Using this unit as anConnecting the unit to a computer External drive Mass storage SD card folder structure When the driver is not recognized When the driver is recognizedChecking the connections Computer Connecting to a MacintoshConnecting the unit to a the computer Operating environment required for external drives Playback menu Others 1 MenusRecording menu Top menu Submenus Purpose Settings/Notices Mode Setup menu Purpose Settings/Notices Mode Date YES / no OFF Motion picture recording display When recordingOthers 2 LCD monitor displays Still picture recording display Motion picture playback display During playbackStill picture playback display Others 3 Messages Message Device that cannot be used with this unit is Disc cannot be used or cannot be written on. UseNew disc Connected to the unit Status indicator is flashing while using the battery Others 4 TroubleshootingPower does not turn on Unit does not operate normally Motion picture recording stops on its own Unit does not recognize the SD card when inserted Speaker volume is lowData cannot be deleted Indication After disconnectingAn error message Disappears, Error Function cannot be used or selected Fade ModeImage stabilizer Mode While using MagicPix Scene mode Function Condition Digital zoom When using the unit Others 5 Cautions for use Battery SD cards AC adaptor LCD monitor Condensation CleaningShock proof Others 6 Specifications Power consumption Recording mode and transferPower source Recording media Accessory No Description Optional accessoriesOthers Accessory Order Form For USA Customers Visa Request for Service Notice USA Only Failure to do so will delay your repair Customer Services Directory For USA only For hearing or speech impaired TTY users, TTY Panasonic Video Products Limited Warranty Limited Warranty Coverage Carry-In, Mail-in Prepaid or In-Home Service Limited Warranty Limits And Exclusions Warranty For Canadian Customers Index Numerics Cierre la tapa de la tarjeta/batería Spanish Quick Use Guide/Guía españolaInserte la batería Conecte el adaptador de CA suministrado Abra la cubierta del terminal Para el uso rápidoIntroduzcahora. la fecha y la Grabación Imágenes en movimiento Durante la reproducción Seleccione SÍ Imágenes en movimientoPóngalo en Deseada.Seleccione la escena 114 VQT1M21 VQT1M21 Panasonic Puerto Rico, Inc Panasonic Canada Inc