Panasonic Section 520 manual Power on the DBS

Section 520 - TSAPI Chapter 3. Installation

5.Connect the provided serial cable from Port 1 (or Port 2) to the serial port on the Network Server. The cable must be configured as shown in Figure 2 below. The API port used must match the DBS API Port Type setting specified in FF1 2# (41-42)# 1# (0-1)# and the port specified with the NetWare Loadable Module driver “Panadrvr”. See “Programming the DBS” on page 8 and “DBS Driver Installation” on page 9 for more information.

Note: If the distance from the DBS to the server exceeds 50 feet, line extenders or short range modems are required.

Figure 2. Telephony Services Serial Cable Pinout

	TD	2	2	RD
	RD	3	3	TD
	CTS	4	7	RTS
	RTS	5	4	DTR
DB-25	DSR	6		DB-9
Male				Female
	DCD	8
	SG	7	5	SG
	DTR 20		1	DCD
			6	DSR
			8	CTS

6. Power on the DBS.

DBS-92-520 Issued April 2000 7