Panasonic Section 520 manual Change MWI Activator, Display Active Call List

Section 520 - TSAPI Chapter 5. Maintenance and Troubleshooting

k: Change MWI Activator

Specifies the activator extension of a CSTA set message waiting indicator request. This is normally supplied through private data, however, most applications are not written to support this option for Panasonic. This option allows the command to be honored by the driver and passed to the DBS. If not set, and private data not supplied, the command is rejected.

This value is normally disabled (-1).

MWI is set to -1New Value (<Enter> for no change)?

l: Display Active Call List

Displays the real-time status of active calls within Panadrvr. This screen interferes somewhat with Panadrvr’s real-time operation and should be used only by support personnel.

MCC/Panasonic Telephony

Services Driver for the

DBS

-------------------------------------------------------------------

Time on

line 000

days 01 hours 06

minutes

33 seconds

CallID

Type

Port

State

Type

Port

State

Type Port

State

Type

Port

State

00001

Int

0000

CONN

Int

0002

NONE

---

0255

NONE

---

0255

NONE

====================================================================================

Press <Esc> to return to the Main Menu...

Each row represents one assigned call block in Panadrvr. Each call block may contain up to 4 extensions or trunks. The format of the display is discussed below.

DBS-92-520 Issued April 2000 43