Section 520 - TSAPI

Chapter 5. Maintenance and Troubleshooting

 

 

 

d: Change Max Call Time Value

Specifies the maximum time in hours that Panadrvr considers a call to be valid. Should this timer expire, the call is removed from Panadrvr and call cleared events sent to all the applications monitoring the affected extensions. Note, this has no effect on the actual DBS call.

The default is 12 hours.

e: Call Processing Toggles

This menu selection allows modification of certain CSTA event sequences. It should not be used unless recommended by Panasonic technical personnel

.

1:Disable CSTA ClearCall Commands

2:Disable Send Service Initiated Events due to Makecall Request

3:Disable Send Failed Events on Busy Tone

4:Disable Event Filtering

Enter 1-4 (ESCape to exit)...

1. Disable (Enable) CSTA ClearCall Commands

Normally, Panadrvr allows the CSTA ClearCall feature and indicates this when responding to the CSTA GetApiCaps request. If this option is disabled, Panadrvr will still allow the ClearCall feature, but will no longer indicate that it is doing so.

2.Disable(Enable)SendServiceInitiatedEventsduetoMakecallRequest.

This item disables (enables) Panadrvr’s issuance of a Service Initiated (i.e., dialtone) event if Panadrvr detects this is due to a CSTA MakeCall request.

3. Disable (Enable) Send Failed Events on Busy Tone

In the DBS, the last remaining extension on a previously active call listens to busytone. Panadrvr interprets this event as a CSTA Failed Event and sends this event to all involved client applications. Some applications display this as ‘Busy’ while others report it as ‘Failed’ or in some other fashion. This switch determines whether or not Panadrvr issues this event to client applications.

4. Disable (Enable) Event Filtering

This disabled (enables) the drivers honoring of a stream’s filters associated with a given device monitor.

DBS-92-520

Issued April 2000

39

Page 45
Image 45
Panasonic Section 520 manual Change Max Call Time Value, Call Processing Toggles