Chapter 5. Maintenance and Troubleshooting | Section 520 - TSAPI |
|
|
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Unable to allocate Tserver buffer, return code = %d\n", rc).
The Tserver has denied Panadrvr’s request for a memory buffer.
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Insufficient resources for newcall().").
Panadrvr could not allocate more memory from the Novell OS for additional call blocks.
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Send to server error first try (%d).", rc).
Panadrvr could not send a packet out over the network. It will wait 2 seconds and try again.
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Send to server error second try (%d).", rc).
Panadrvr tried and failed a second time to send a packet over the network. The packet has been lost.
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Ports
Panadrvr is out of a critical system resource.
The following error messages indicate a severe problem in the low level task management system of Panadrvr. Panadrvr will attempt to recover from such situations; however successive errors of this type indicate that Panadrvr is in trouble. Should this occur, call Panasonic Technical Support.
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(acsRxPort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(cstaRxPort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(cstaSendResponsePort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(cstaToneEventHandlerPort) fail.")
TDILogErro(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(cstaEventHandlerPort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(cstaConfEventHandlerPort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(dbsRxThreadPort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(netTxPort) fail.")
TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Preceive(appl_TX_Port) fail.")
22 | Issued April 2000 |
