Section 520 - TSAPI | Chapter 5. Maintenance and Troubleshooting | |
|
|
|
2: Display Error Counters
This selection brings up a real time (updated once per second) screen which displays the values of various error counters in the Panadrvr. These counts are reset by pressing ‘C’.
MCC/Panasonic Telephony Services Driver for the DBS
Time | on line 000 days 01 | hours 57 minutes 05 seconds |
| |||
***DBS*** |
|
|
|
|
|
|
Bad/No Resp to Select Req | 00000098 | Naks to Select Request | 00000190 |
| ||
Aborted DBS select tries | 00000037 | DBS rx data | timeouts | 00000000 |
| |
Answer Requests | to DBS | 00000007 | DBS packets | Nakd by PC 00000000 |
| |
Driver selected, DBS no send data timeouts | 00000000 |
|
| |||
***Driver*** |
|
|
|
|
|
|
Packets Nakd by | DBS | 00000000 | Answer reqs | from DBS | 00000000 |
|
PC packet sends | aborted | 00000038 |
|
|
|
|
Net: Rx Errors |
| 00000000 | Tx Errors | 00000000 | GetBuf Fails | 00000000 |
WatchDog Timeouts | 00000003 | Port Reconfigurations Received | 00001357 | |||
DBS Resets Rx'd |
| 00000059 | Carrier Detect Losses |
| 00000004 | |
Press <Esc> to return to the Main Menu, 'C' to clear the counters...
This screen is divided into 3 sections: errors originated by the DBS, errors originating in Panadrvr, and miscellaneous information. Fields are described as follows:
Section 1: DBS
Bad/No Resp to Select Req
This indicates that Panadrvr made an attempt to get the DBS’s attention and the DBS did not respond appropriately.
Naks to Select Request
The DBS denied Panadrvr’s request for communication.
Aborted DBS select tries
Panadrvr will make up to 7 attempts to select the DBS, after which time it aborts the attempt and increments this counter.
Issued April 2000 | 27 |
